Provides optimum control of Davies Craig 12V & 24V Electric Water Pumps and Electric Fans. Suits EWP®80, EWP®115, EWP®130, EWP®140 & EWP®150, as well as the full range of Thermatic® Electric Fans and billeted style Electric Water Pumps.

The latest updated controller offers enhanced appearance, is slimmer and the seven-pin plug is safely tucked away, out of sight at the base of the Controller. It has 2 mounting options:

• Bracket
• Nylon Plate

The EWP®/Fan Digital Controller has two specific functions:

• Will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperature - including after the ignition is turned off
• Manage control of your electric engine fan.

The Controller has a push-button to lock in any temperature from 40°C (104°F) to 110°C (230°F). It’s recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.

The Digital Controller will operate the engine’s electric fan automatically once the engine has reached +3°C (+5.4°F) above the targeted / set temperature. Another significant benefit is that the Controller allows the EWP® & Fan to run on after ignition shutdown for either 3 minutes or -10°C (-14°F) of set set / target temperature to eliminate heat soak.

- There are other options on how to operate your Davies Craig Electric Water Pump, Thermatic Fan or Booster Pump which can be found here - Davies Craig Switches & Controllers

Full and detailed operating information for the digital controller can be found HERE