The Davies Craig Universal Dual Fan Mounting Kit includes all parts necessary for mounting & wiring one or two 12V Fans for both Davies Craig and other Electric Fan models.

  • This kit is designed for wiring twin fans when using the Davies, Craig 8002 controller or 0400, 0401 Mechanical Thermatic switch and 0444 (family), 0500 Digital Switches.
  • This kit includes only the wiring required for duel fans installation.
  • For mounting your fans, you might require a 0422 (twin fan mounting bracket)

The range of Universal Fan & Transmission Oil Cooler mounting kits:


Part #1000: SINGLE FAN MOUNTING HARDWARE KIT (12V)

Part #1001: SINGLE FAN MOUNTING HARDWARE KIT (24V)

Part #1002: DUAL FAN MOUNTING KIT - UNIVERSAL (12V)

Part #1003: DUAL FAN MOUNTING KIT - UNIVERSAL (24V)

Part #0578: FAN & TRANS OIL COOLER MOUNTING HARDWARE (UNIVERSAL)

Part #0579: QUICK FIT KIT FOR FANS & TRANSMISSION OIL COOLERS




COMPONENTS UNITS
Fuse Wedge 15 AMP   2
Fuse Wedge 30 AMP   2
Red Wire Joiner 2
Nut Nyloc 3/16 8
Bolt Hex W/F 3x3/16  8
Relay - 12V 40 AMP 5 Pin with Resistor Protection  2
Washer - Fibre Red 8
Washer Mudguard Silver 8
Blue Wire Joiner 4
Blue 6mm Ring Terminal 2
Wiring Harness - Fan 12V & 24V 2
Screw Self Tap 2
Universal Fan Hardware Kit Instructions 1


MOUNTING YOUR ELECTRIC FAN

Please pay particular attention to the markings on the fan hub/blade regarding the direction the fan should operate as Davies Craig Electric Fans are reversable. Once the fan is installed the arrow may not be visible.

The Thermatic Fan fitting instructions must be closely followed, regardless of whether the unit is mounted upstream or downstream.