The EBP23 is available for purchase in following options:

The EBP23 is a ‘brushless’ 12 volt, high flow (23 litres / 6 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP applications include: booster for car heater and LPG systems, solar pump applications, water cooled motorcycle, go-kart engines, turbo air / water intercoolers & household irrigation.

The EBP®23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP® can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.

TECHNICAL SPECIFICATIONS
Operating voltage 6V DC to 18V DC
 Rated Current Draw 1.25A
 Input Power 15W
Flow rate (max) 23 L/min (6.0 US gal/min) @ 0 Bar
Flow rate (rated) 17.25 L/min (4.6 US gal/min) @ 0.1 Bar
Operating temp -40° to 125°C (-10° to 257°F)
Drive Magnetic - No Seals
Pump weight 364 grams (0.8 lb)
IP Rating IP68
Burst pressure 250 kPa (36 psi)
Max Head Height 2.5 meters
Self Priming No, none of our pumps are self-priming
Fits hose size 19mm (3/4”) Use EBP Adaptors for ID 12mm -> 19mm
CONTENTS - PART DESCRIPTION UNITS
EBP23 Booster Pump 1
EBP Adaptors (Stepped 19mm to 12mm) 2
Heater Hose - 19mm ID 11cm
Hose Clamps 4
Mounting Bracket 1
Wiring Loom (AMP Plug) 1

Electric Booster Pump Comparison chart

EBP23
Use for thermosyphon cars, boosting car heater performance, liquid-cooled motorcycles and scooters up to 500cc, and other low powered closed-circuit cooling systems eg hovercraft, lawnmowers. Also suitable for Larger-engined motorcycles 500cc-1000cc. Air-to-water intercoolers for turbos & superchargers.
EBP25
Higher powered motorcycles and lower powered kit cars. Air-to-water intercoolers for turbos & superchargers. Significantly better flow rates than the EBP23 when resistance to flow is higher, eg with long hose runs.
EBP40
Very high powered / race motorcycles, intercoolers, solar heating systems etc (12V & 24V)
EBP PUMP RANGE TECHNICAL SPECIFICATIONS
EBP23 EBP25 EBP40 (12V) EBP40 (24V)
Operating Voltage 6v - 18v 8v - 20v 9v - 15v 21v - 27v
Rated Current 1.25A 2.1A 4.6A 2.5A
Flowrate @ 12v 23.0 L/min 27.0 L/min 37.0 L/min 37.0 L/min
Operating Temperature -40 to +120 C -40 to +120 C -40 to +120 C -40 to +120 C
Pump Weight 364 g 650 g 570 g 570 g
Height x Width x Depth (mm)excl couplers 85 x 80 x 68 120 x 105 x 75 120 x 90 x 70 120 x 90 x 70
Burst Pressure 36 psi 36 psi 36 psi 36 psi
Fits Hose sizes 3v - 15v 3v - 15v 3v - 15v 3v-15v
Suits Engine Sizes 12mm - 19mm 19mm 19mm 19mm
EBP23 - Read more EBP25 - Read more EBP40 (12V) - Read more EBP40 (24V) - Read more